GU flat nozzle

for adhesives and sealing compounds

Processing

  • Screw the flat nozzle onto the can of adhesive/sealing compound. Cut the application apertures to the desired application width and number. The adhesive/sealing compound can now be applied using a hand-operated gun, by placing the flat nozzle against the appropriate surface. Cut off the lateral guide support for application to inner edges

The GU flat nozzle is a nozzle and application aid for adhesives and sealants (fluid or paste) with 5 application apertures, allowing for an application width of 20 – 75 mm by cutting as required. Adhesives and sealants can be applied cleanly and precisely both to narrow battens and to wide areas using the GU flat nozzle. The guide support, attached to the side, ensures a uniform and parallel application technique on rounded or angular external edges of the adhesion surfaces. This can easily be removed for inner edges (simply cut off). Lateral guards make sure that the bead of adhesive can consistently be applied to the workpieces with an even thickness.

  • Adjustment of the application apertures by cutting as required
  • Uniform application of the adhesive/sealing compound to a width of 20 – 75 mm
  • Clean and precisely defined application of the adhesive/sealing compound
  • Can also be used for inner edges
  • Uniform, parallel application technique on rounded or angular external edges
  • Area of application: Sealing compounds and smoothing agents

Do you have any questions? Contact us via email, we are happy to help:

[email protected]