ixalo Wall Reader | SE
The ixalo Wall Reader SE is a flexible access component for electronic locking systems, specifically designed for use with motorized locks, electric door openers, or automatic door drives. It enables convenient and secure access control in areas without a mechanical locking cylinder – e.g., at main entrances, barriers, or elevators.
The contactless reading function allows easy use of SE keys or SE transponders. Centralized management is provided via the BKS KeyManager, allowing individual access rights to be adjusted at any time. Thanks to its robust design and optional IP44 protection rating, the ixalo Wall Reader SE is also suitable for outdoor use – ideal for buildings with high security requirements and complex access scenarios.
ixalo | SE is individually configured by authorized partners via our MKS system.
Technical Highlights
- Enables contactless access via transponder or SE key – ideal for doors without a cylinder
Integrable into the BKS access control system – centralized management via the KeyManager
- A large event memory enables seamless documentation of access events and can be deactivated if required
Supports the control of door openers, barriers, or motor locks via potential-free relay contacts
- Flexible programming and management – via programming device or bus
Compatible with SE system components such as cylinders, locks, and control units
Technical Data
| Technical Data | |
|---|---|
| General Description | The SE reader is designed for installation in flush-mounted switch boxes. |
| Power Supply | 12 … 24 V DC (−15 % / +10 %), max. 80 mA |
| Recommended Power Supplies |
|
| Environmental Conditions |
|
| RS485 Bus | Max. length 1000 m Max. participants 32 |
| Relay Output | Contact rating 1 A at 30 V DC |
| Data Transmission | Capacitive |
| Transponder | 30,000 transponders (offline mode) 64,000 transponders (Data on Transponder mode) 2,500 events 128 time zones 50 special days 50 special day periods |
| Dimensions | Ø approx. 55 mm, depth 30 mm |
| Certification | 
|
| Technical Data | |
|---|---|
| Power Supply | 12 … 24 V DC (−15 % … +10 %), max. 80 mA |
| Recommended Power Supplies |
|
| Environmental Conditions |
|
| Max. length RS485 bus | 250 m |
| Power Supply |
- Duracell Ultra CR2 - Panasonic CR2 - Energizer CR2 |
| Dimensions | 
|
| Relay Output | Contact rating 0.5 A at 30 V DC |
| Data Transmission |
* MIFARE DESFire and MIFARE Classic are registered trademarks of NXP B. V. |
| Transponder | RFID transponder 5931 | 5932 | 5934 | 5935 | 5937 | 5938 |
| Master | System master card 5930 for RFID |
Configure products of the ixalo | SE series
Exclusive for authorized partners.
Help/information about our MKS system.
