Electronic. Flexible. Secure.

ixalo security fitting SE

The ixalo security fitting combines robust mechanics with intelligent electronics – for convenient access and certified security. The SE system with active transponder enables contactless access without door wiring – ideal for high-traffic areas as well as fire and escape doors.

The stainless steel fitting meets ES3 according to DIN 18257, is weather-protected (IP65) and can be used flexibly: various lever handle models, right/left application, panic function. The energy-efficient electronics enable up to 160,000 locking cycles or 8 years standby. Access rights can be centrally managed with the BKS KeyManager.

ixalo is individually configured by authorized partners via our MKS system.

Technical highlights

High energy efficiency with up to 120,000 locking cycles or 5 years standby per battery – for low-maintenance continuous operation
Approved for fire and escape doors according to EN 179 / EN 1125 – ideal for security-relevant doors in commercial buildings
Optical and acoustic signaling reliably indicates the access status – directly at the door

Retrofittable handle direction (right/left) – for maximum flexibility during installation

Various versions available: single- or double-sided electronics, different hole patterns, various handle models
Optionally available as an online version – for central control and automatic authorization updates via the BKS KeyManager

Specifications at a glance

Technical data

Technical data
General description	Electronically engageable fitting (access point) Access control via SE transponder Management software – BKS KeyManager Contactless programming with management software and programming device Optional online programming via radio Clutch engagement time adjustable from 2 to 60 seconds Day release, permanently engaged Four-eyes principle EMA function (intrusion alarm system) Multi-level battery warning
Variants	5394 \| 5994 long plate set Versions also available with optional radio module for online systems
Dimensions	Dimensions: 260 x 38 x 20.5 [mm] (length x width x depth) Square spindle: depending on version ☒ 7 mm, ☒ 8 mm or ☒ 9 mm Backset E: 72, 92 mm for PZ or 74, 78, 94 mm for CHRZ Door thickness (DT): min. 38 to max. 98 mm Hole patterns: unpunched, PZ72, PZ92, CHRZ74, CHRZ78 or CHRZ94 Surface: Niro matt
Signaling	Acoustic and optical
Durability	Endurance test according to EN 1906 (200,000 locking cycles)
Power supply	2x lithium CR2 battery, 3 V Permitted battery types: – Duracell Ultra CR2 – Panasonic CR2 – Energizer CR2
Battery life	Technology \| SE: up to 120,000 locking cycles or 5 years standby at 20 °C No data loss when battery is empty Two-stage warning is activated in case of voltage drop
Time / date	Buffering of the internal real-time clock during battery replacement max. 5 min
Transponder	SE transponder 5336 \| 5337 \| 5338 \| 5339
Master	SE transponder 533x with access authorization for the respective access point
Data transmission	Technology \| SE: – Capacitive: 125 kHz Data is AES-128 encrypted
Radio interface (optional)	Frequency: 868 MHz Range: up to 5 m Encryption: AES-128
Memory capacity	30,000 transponders (offline / online) 64,000 transponders (data on transponder) 2,500 events 128 time zones 50 special days 50 special day periods
Environment	Operating temperature: -20 ºC to +60 ºC Storage temperature: -25 ºC to +70 ºC Rel. humidity: up to 95% at 40 ºC, non-condensing Corrosion protection: EN 1670 class 3 (high resistance = 96 h corrosion test) Protection class: IP30 according to EN 60529 Suitable for outdoor conditions, but protected from weather by a canopy, carport or similar protection. Not suitable for use in wet areas where predominantly high (> 75%) humidity prevails.
Certifications	EN 1634-1 Fire protection FS30 EN 1906 Locks and building hardware – lever handles and knobs – requirements and test methods 4 \| 7 \| – \| B1 \| 1 \| 3 \| 4 \| B DIN 18257 – ES3 – L (-ZA) EN 179 Locks and building hardware – emergency exit devices with lever handle or push plate for doors in escape routes